Chain Saw Safety Warnings - Partner P818 Originalanleitung

Remove any adjusting key or wrench before turning
d)
the power tool on.
Do not overreach. Keep proper footing and balance
e)
at all times.
Dress properly. Do not wear loose clothing or
f)
jewellery.
Keep your hair, clothing and gloves away
from moving parts.
If devices are provided for the connection of dust
g)
extraction and collection facilities, ensure these are
connected and properly used.
4) Power tool use and care
Do not force the power tool. Use the correct power
a)
tool for your application.
Do not use the power tool if the switch does not turn it
b)
on and off.
Disconnect the plug from the power source and/or the
c)
battery pack from the power tool before making any
adjustments, changing accessories, or storing power
tools.
Store idle power tools out of the reach of children and
d)
do not allow persons unfamiliar with the power tool or
these instructions to operate the power tool.
Maintain power tools. Check for misalignment or
e)
binding of moving parts, breakage of parts and any
other condition that may affect the power tool's
operation. If damaged, have the power tool repaired
before use.
Keep cutting tools sharp and clean.
f)
Use the power tool, accessories and tool bits etc. in
g)
accordance with these instructions, taking into
account the working conditions and the work to be
performed.
5. Service
Have your power tool serviced by a qualified repair
a)
person using only identical replacement parts.

Chain saw safety warnings:

Keep all parts of the body away from the saw chain
•
when the chain saw is operating. Before you start the
chain saw, make sure the saw chain is not contacting
anything.
Always hold the chain saw with your right hand on the
•
rear handle and your left hand on the front handle.
Hold the power tool by insulated gripping surfaces
•
only, because the saw chain may contact hidden
wiring or its own cord.
Wear safety glasses and hearing protection. Further
•
protective equipment for head, hands, legs and feet is
recommended.
Do not operate a chain saw in a tree.
•
Always keep proper footing and operate the chain
•
saw only when standing on fixed, secure and level
surface.
When cutting a limb that is under tension be alert for
•
spring back.
Use extreme caution when cutting brush and
•
saplings.
Carry the chain saw by the front handle with the chain
•
saw switched off and away from your body. When
transporting or storing the chain saw always fit the
guide bar cover.
Follow instructions for lubricating, chain tensioning
•
and changing accessories.
Keep handles dry, clean and free from oil and grease.
•
Cut wood only. Do not use chain saw for purposes
•
not intended. For example: do not use chain saw for
cutting plastic, masonry or non-wood building
materials.
Causes and operator prevention of kickback:
Kickback may occur when the nose or tip of the guide
bar touches an object, or when the wood closes in
and pinches the saw chain in the cut.
Tip contact in some cases may cause a sudden
reverse reaction, kicking the guide bar up and back
towards the operator.
Pinching the saw chain along the top of the guide bar may
push the guide bar rapidly back towards the operator.
Either of these reactions may cause you to lose
control of the saw which could result in serious
personal injury. Do not rely exclusively upon the
safety devises built into your saw. As a chain saw
user, you should take several steps to keep your
cutting jobs free from accident or injury.
Kickback is a result of tool misuse and/or incorrect
operating procedures or conditions and can be
avoided by taking proper precautions as given below:
Maintain a firm grip, with thumbs and fingers
•
encircling the chain saw handles, with both hands on
the saw and position your body and arm to allow you
to resist kickback forces.
Do not overreach and do not cut above shoulder
•
height.
Only use replacement bars and chains specified by
•
the manufacturer.
Follow the manufacturer's sharpening and
•
maintenance instructions for the saw chain.
Additional Safety Recommendations
Manual use.
1.
read the user manual completely with extreme care.
The user manual must be included with the machine
in the case of sale or loan to another person.
Precautions prior to machine use.
2.
machine to be used by any persons who are not
perfectly familiar with the manual instructions.
Inexperienced persons must follow a training period
operating on a saw horse only.
Control checks.
3.
use each time, especially if it has been subject to
strong impact, or if it shows any signs of malfunction.
Perform all operations described in the chapter
"Maintenance & Storage – Before each use".
ENGLISH - 3
All persons using this machine must
Never permit this
Check the machine with care before