Canton Smart Sub 12 Kurzanleitung Seite 21

Wireless connection with Smart floorstanding- / compact speakers:
Note:
• Before connecting the Smart Sub 12 to the Smart speaker, please make
sure that the (new) Smart Sub 12 to be paired is not connected to the power
supply.
Turn on the (Master) Smart speaker using the „Power" button. Press the menu
1
button „M" on the Smart remote control to access the main menu of the
speaker. Select [WIS] Wireless Setup and press „OK".
Now, select [WSP] Wireless Pairing and press „OK".
2
Use the arrow keys ( , ) to select and confirm the master speaker:
3
MFL = Master Front Left
MFR = Master Front Right
MSL = Master Surround Left
To connect another speaker, press „OK".
4
Use the arrow keys ( , ) to select the speaker you want to pair. The following
5
channels are available:
FL = Front Left | FR = Front Right | CE = Center
SL = Surround Left | SR = Surround Right | SUB = Subwoofer
In this case, select [SUB] „Subwoofer".
Press the „OK" button. The display shows [PIR] „Pairing Sub".
6
Now, plug the power cord of the Smart Sub 12 into the wall socket.
7
Approximately 10 - 20 seconds after the subwoofer is connected to the mains,
8
the status changes to [CON] „connected". Smart speaker and subwoofer are
connected, now. Press the menu button „M" repeatedly or wait 30 seconds to
exit the menu.
MCE = Master Center
MSR = Master Surround Right
English
3 2 1