Environmental Protection - eta ZEFIR Bedienungsanleitung

For safety reasons, the shaft A3 and the propeller nut A12 have an anti-clockwise thread.
CONTROL:
Connect the fan to the mains. Use selector A1 to switch on the fan and to select required
airflow rate.
ON/OFF switch + operation mode selector (A1)
Position
Off
Low airflow rate
Medium airflow rate
TURBO – high airflow rate
Silent operation – the lowest airflow rate
Oscillation settings
Oscillation is only selectable ON or OFF.
For run the oscillatoin (rotate from side ti side) press the Oscilation knob A2 (= ON). To
stop.
oscillation, pull the oscillation knob A2 out (= OFF).
IV. MAINTENANCE
The appliance only requires surface maintenance. Clean the surface of the appliance and
the power supply with a damp cloth.
V. ENVIRONMENTAL PROTECTION
If the dimensions allow, there are labels of materials used for production of packing,
components and accessories as well as their recycling on all parts. The symbols specified
on the product or in the accompanying documentation mean that the used electric or
electronic products must not be disposed of together with municipal waste. For proper
disposal of the product, hand it over at special collection places where it will be taken
over free of charge. Suitable disposal of the product can help to maintain valuable natural
resources and to prevent possible negative impacts on the environment and human
health, which could be the possible consequences of improper waste disposal. Ask for
more details at the local authorities or in the nearest collection site. Fines can be imposed
for improper disposal of this type of waste in agreement with the national regulations.
If the appliance is to be put out of operation for good, after disconnecting it from power
supply we recommend cutting off the power cord and thus it will not be possible to use the
appliance again.
Warning
Description
13 / 27
EN