Abilica XS 2.0 Bedienungsanleitung Seite 9

1. Inspect all the Nuts, Nut Caps and Pedals and re-tighten as needed regularly and inspect the
equipment periodically. Should you find any defective parts, replace them immediately.
Don't exercise until they are repaired.
2. Pay more attention to normal wear on parts. As in the following figure, please inspect the
Brake pad (20) to make sure that it is in good working condition before exercise. If it is not,
please replace it.
3. Before exercise, please inspect the Pedals to make sure that they are not loose, please repeat
installation Step 2 if they are loose.
4. Please adjust the Hexagon Nut by using the Opening Wrench if the Seat (12) is loose.
5.If you need to move the bike, use the tips of the Handlebar (2) and tilt the bike forward onto the
Pulley (27) and push or pull.
NOTICE
12
9
20
2
27