Operation; Switching On The Sauna; Starting The Sauna; Starting The Sauna With Activated Child Lock - infra world Saunacontrol T Montage- Und Gebrauchsanweisungen

6.1.

Switching on the sauna

6.1.1. Starting the sauna

After pressing the button, the start screen appears on the display.

6.1.2. Starting the sauna with activated child lock

If the display shows „L O C K E D" when the sauna is switched on
The child lock function can be deactivated by holding down the
button. The child lock is automatically enabled again when the sauna is switched off.
Saunacontrol
T
Infraworld V1.0/101
Select the operating mode by pressing the
- 1x for sauna
- 2x for blower [only active with blower function = YES] (see item 5.3)
After the countdown time has expired (counting down from 5 to 0 on the top right-hand side of the display), the
selected operating mode is enabled. The sauna starts with the last values set.
To access the programming mode, hold down the
(see item 7. Preselection, operating time).
Displays

Operation:

sauna 01:25:30
temperature:
Settings:
- settings -
temperature:
6. OPERATION
Start screen
button several times:
Sauna mode selected with current operating time
Black progress bar with operating time (actual value, reference value)
Current sauna temperature
50
°C
Red progress bar (actual value, reference value)
Reference sauna temperaturer
65
°C
, the child lock is active.
and buttons and briefly pressing the
button for 2 sec. (before the countdown time reaches 0)
EN
25