Kacsoo JY-105 Technisches Handbuch Seite 7

3. Preparation
Pull out the humidification bottle gently
along the direction shown in the
figure,pull out the rubber plug at the top
and add cold the purified water of
exceeding the maximum water leve,
(Figure 5)
Note: the water tank can be positive
without adding water regular oxygen
production
Close the water tank with rubber plug, and replace the humidified
water tank with the machine
Connect the power supply, connect one end of the power line to the
outlet hole of the oxygen generator, and the other end to the outlet
with power output
Press the power switch to "I", then enter the standby state. Press the
"switch" key, then enter the normal operation state. When the
oxygen generator is working, it makes a sound of "Chi ~"every few
seconds, which is a normal breath sound.
4. Oxygen Intake Operation
Press the "flow"button in the control button area to adjust to the
required flow rate. The oxygen outlet should have oxygen output.
Connect oxygen pipe nozzle to oxygen outlet of moisture bottle.
Adjust nosal tube to make the inhaler comfortable, then allow to
inhale oxygen.
Installation and Use
6
Figure 5