Maintenance and Service
Warning: before maintenance of the oxygen generator, first cut
off the power supply. To avoid electric shock, do not disassemble
the casing.
1. Clean the housing
Keep the housing clean: first power off, use wet and soft cloth
immersed in sterilizing fluid to clean and prevent any liquid from going
into the clearance of the housing.
2. Replace filter
The replacement of filter is very important to protect compressor and
molecular sieve and prolong the service life of oxygen generator.
Please replace it in time. If the concentrator has been used for 300
hours, the filter shall be replaced once.
Warning: do not operate the oxygen generator when the filter is
not installed, which will damage the machine for a long time.
Pull out the filter cover (see Figure 8);
Pull out the filter and replace it with a new one (see Fig. 9);
Press the filter cover back in place.
Figure 8
10
Circular filter
Circular sponge
Figure 9