Kacsoo JY-105 Technisches Handbuch Seite 14

Maintenance and Service
The oxygen
generator
works, but there
is little or no air
output at the
oxygen inlet
The oxygen
generator
haspower
supply, but the
machine does
not work, and
the display
shows "fault"
Note: if the failure of oxygen generator cannot be eliminated,
please contact the supplier or manufacturer
1) Kinked or blocked
oxygen pipeline
2) The rubber plug of
the humidification bottle
is not covered tightly or
is missing
3)Blocked
humidification water
tank
4) Filter dirty
5) Contact supplier or manufacturer if persistent
1)Compressor
overheating protection,
shutdown
2) If this condition persists, stop using the
machine and contact the equipment supplier
or manufacturer immediately
13
1) Straighten out the
pipeline
2) Retighten
3) Clean the
humidification
water tank
4) Replace filter
1）Shut down and
restart the machine
after it cools down