Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
TAPE MODE
1.
Turn the control [FUNCTION] to "TAPE" to switch to tape mode.
2.
Press the [EJECT] button to open the "Cassette Drive".
Insert a cassette into the drive and close the "cassette drive".
3.
4.
Start playback with the [PLAY] button.
5.
Use the following buttons to control playback:
Record:
Play:
Rewind:
Fast forward:
Stop playback / Eject:
Pause:
Record Cassette:
1.
Open the "Cassette Drive" and insert an empty cassette.
2.
Select the desired playback mode (example: FM / UKW).
3.
Press the Record button to start recording.
4.
To end the recording, press the Stop button.
PHONO MODE
1.
Turn the control [FUNCTION] to "TURNTABLE" to switch to the turntable
mode.
2.
Select the playback speed based on your record with the [speed control]
(33/45/78 rpm).
3.
Place the vinyl on the turntable.
4.
Raise the [Tonearm] with the [Tonearm Lifter].
5.
Move the tonearm over the vinyl.
6.
The turntable starts rotating.
7.
Lower the tonearm with the [Tonearm Lifter].
8.
Playback starts.
Autostop
On:
Off:
Note:
Before playing, check that all transport stickers have been removed and
that the protective cap has been removed from the sound needle.
The tonearm does not automatically return to the zero position after
playback.
The turntable will stop automatically when playback
reaches the end point.
The turntable does not stop automatically.
21
►
◄◄
►►
■/▲
▌▌
Werbung
Inhaltsverzeichnis
