Getting Started; Operating Noises - Klarstein Vinamour 37 Duo Bedienungsanleitung

GETTING STARTED

Plug in and switch on the cellar by pressing on the power button for a few seconds.
When you use the wine cellar for the first time (or restart the wine cellar after having it
shut off for a long time), there will be a few degrees variance between the temperature
you have selected and the one indicated on the LED readout. This is normal and it is
due to the length of the activation time. Once the wine cellar is running for a few hours
everything will stabilize.
Note: If the unit is unplugged, power is lost, or turned off, wait 3 to 5 minutes before
restarting the unit. The wine cellar will not start if you attempt to restart before this
time delay.

Operating Noises

To reach the desired temperature settings, wine cellars, like all wine cellars operating
with compressors and fans, may produce the following types of noises. These noises are
normal and may occur as follows:
• Gurgling sound - caused by the refrigerant flowing through the appliance's coils.
• Cracking/popping sounds - resulting from the contraction and expansion of the
refrigerant gas to produce cold.
• Fan operating sound - to circulate the air within the wine cellar.
Loading the Wine Cellar
• Leave space between the wine bottle and the side walls so that the air in the refrigerator
can circulate freely and the cool air is distributed throughout the refrigerator.
• Do not overload the appliance to avoid obstructing the airflow inside the appliance.
• Do not block the internal fan on the rear panel or shut it down.
• Do not pull out more than one filled tray at a time, as this may cause the appliance
to tip forward.
• Do not cover the shelves with aluminum foil to prevent airflow.
• Do not move the appliance while it is loaded with bottles. You could injure yourself
or damage the appliance.
EN
17