Getting Started; Energy Saving Tips - Klarstein BEERSAFE Bedienungsanleitung

EN
16

GETTING STARTED

Setting the Temperature Control
Your unit has only one control for regulating the temperature in the compart- ment. The
temperature control is located at the upper right hand side of the compartment.
• The first time you turn the unit on, set the temperature
control to „5".
• The range of the temperature control is from position
„0" (Off) to „5". After 24 to 48 hours, adjust the
temperature control to the setting that best suites
your needs. The setting of „3" or „4" should be
appropriate for home or office use. To turn the
appliance off, turn the temperature control to „0".
Note: Turning the temperature control to „0" position stops the cooling cycle but does
not shut off the power to the unit. If the unit is unplugged, has lost power, or is turned
off, you must wait 3 to 5 minutes before restarting the unit. If you attempt to restart
before this time delay, the unit will not start.

ENERGY SAVING TIPS

• The unit should be located in the coolest area of the room, away from heat
producing appliances, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the unit. Overloading the
unit forces the compressor to run longer.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the
unit. This cuts down on frost build-up inside the unit.
• Unit storage bin should not be lined with aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air circulation, making the unit less efficient.
• Organize and label food to reduce door openings and extended searches. Remove
as many items as needed at one time, and close the door as soon as possible.