Timer (Timer); Auto Shutdown When The Condensate Tank Is Full - Sygonix 2201954 Bedienungsanleitung

The sleep mode only works in "air conditioner" mode. Sleep mode is automatically switched off when the
condensate tank is full (the water level symbol appears in the LC display) or when the appliance is switched
to standby mode.
g) Timer (TIMER)
It is possible to switch the appliance on and off automatically. You can set the amount of time until the appliance
switches on automatically from standby mode or until it switches off while the appliance is on.
Automatic switching on in standby mode
• The appliance is switched off and in standby mode.
TIMER button (16) on the appliance or the
• Press the
interval (1 - 24 hours). The clock icon appears in the LC display (18).
• Press the TIMER
necessary, until the desired switching time is set. Once the time has been set, the LC display (18) switches back to
the temperature display after a few moments.
• To view a set switching time, briefly press the
remote control. The switching time will be displayed. The LC display (18) switches back to the temperature display
after a few moments.
• The appliance switches on automatically after the preset time has elapsed.
Automatic switching off while the appliance is in operation
• The appliance is switched on.
• Press the TIMER button (16) on the appliance or the
interval (1 - 24 hours). The clock icon appears in the LC display (18).
TIMER button (16) on the appliance or the
• Press the
necessary, until the desired switching time is set. Once the time has been set, the LC display (18) switches back to
the temperature display after a few moments.
• To view a set switching time, briefly press the
remote control. The switching time will be displayed. The LC display (18) switches back to the temperature display
after a few moments.
• The appliance switches off automatically after the preset time has elapsed.
h) Auto shutdown when the condensate tank is full
This product has an automatic evaporation system. This re-uses the condensate for air conditioning to save energy
and increase the cooling efficiency.
• If the condensate tank is full, the backlight on the LC display (18) will blink and the appliance switches to standby
after 8 seconds. An alarm sounds, the compressor and all operating keys will be locked. This status lasts until the
condensate tank is emptied. Please refer to chapter 15. Maintenance a) Emptying the condensate tank.
• Unplug the plug in mains socket after the auto shutdown to reset the appliance. Insert the mains cable (11) with plug
back into the socket again. Press the
button (16) on the appliance or the
POWER button (21) to switch the appliance on again.
button (H) on the remote control to set the desired time
button (H) on the remote control, several times if
TIMER button (16) on the appliance or the
button (H) on the remote control to set the desired time
button (H) on the remote control, several times if
TIMER button (16) on the appliance or the
button (H) on the
button (H) on the
37