Dehumidifier Mode; Fan Mode; Sleep Mode - Sygonix 2201954 Bedienungsanleitung

SPEED button (17) on the appliance or the
• Press the
speed. The fan symbol rotates faster at the higher fan speed. The
symbol indicates a low fan speed.
The air conditioner switches off automatically if the room temperature is lower than the temperature set.
The compressor switches off. The appliance's fan continues to run. If the room temperature increases, the
air conditioner switches on again.
• Keep doors and windows closed during air conditioning. In the event that direct sunlight shines on the room being
cooled, e.g. on windows and doors facing the sun, close any curtains or blinds.
d) Dehumidifier mode
• Press the MODE button on the appliance (20) or the
"dehumidifier" mode. The dehumidifier symbol
• Sleep mode cannot be set while the appliance is in "dehumidifier" mode. In the "dehumidifier" mode, only the low
fan speed is available. It cannot be changed. The
cannot be changed either.
Keep doors and windows closed to achieve better dehumidification.
e) Fan mode
MODE button on the appliance (20) or the
• Press the
The fan symbol lights up and rotates on its own. The other function symbols for the operating modes disappear from
the LC display (18). Only the fan is in operation. There is no air conditioning or dehumidification.
SPEED button (17) on the appliance or the
• Press the
fan speed. The fan symbol rotates faster at the higher fan speed. The fan runs noticeably faster. The
indicates a high fan speed. The
The temperature and sleep mode cannot be set during operation in "fan" mode.
f) Sleep mode
In sleep mode, the appliance increases the temperature set by a total of 2 °C and generally runs at low fan speed. If
you have selected sleep mode, the temperature set is increased by 1 °C after 1 hour, by another 1 °C after another
hour and then remains constant.
• Select "air conditioner" mode. Sleep mode is only possible in "air conditioner" mode.
SLEEP button (23) on the appliance or the
• Press the
to low and cannot be changed. The sleep mode symbol
• Press the SLEEP button (23) on the appliance or the
is no longer shown in the LC display (18).
36
lights up on the LC display (18).
symbol indicates a low fan speed. The temperature setting
symbol indicates a low fan speed.
button (D) on the remote control to set a high or low
symbol indicates a high fan speed. The
button (G) on the remote control to select the
button (G) on the remote control to select "fan" mode.
button (D) on the remote control to set a high or low
button (C) to switch to sleep mode. The fan speed is set
appears in the LC display (18).
button (C) to exit sleep mode. The sleep mode symbol
symbol