Using The Receiver - Vasco Rf Anleitung

USING THE RECEIVER

The receiver can be activated by turning the receiver button.
LED green: power to receiver, but the heating element is
LED red:
1. Moveable window
2. Receiver button ON/OFF
3. Push button Boost
4. Indicator LED
Push button:
By pressing it the boost cycle is activated (duration: 1 hour).
The LED then starts to flash red.
You turn the boost cycle off by pressing the button again.
Please note:
Boost is a command that enables the radiator to heat at
maximum capacity for one hour – with the possibility of interrup-
tion, regardless of room temperature. After one hour the boost
switches off and the thermostat sets the comfort temperature.
!!! You do not have to switch on the thermostat to select
Boost cycle, but the receiver must be on!!!
UK
16
not heating.
the heating element is heating.