Technical Data - Husqvarna LC 151S Bedienungsanweisung

Technical data

Engine
Brand
Engine type
3
Displacement, cm
Speed, rpm
Nominal engine output, kW
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Engine lubrication type
Fuel tank capacity, litre
Oil tank capacity, litre
4
Engine oil
Weight
With empty tanks, kg
5
Noise emissions
Sound power level, measured, dB(A)
Sound power level, guaranteed, L
dB(A)
6
Sound levels
3
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
4
If SAE-30 oil is used at temperatures lower than +5 °C, there is a risk that it does not lubricate the engine
sufficiently. This can cause engine damage. Refer to
for low temperatures.
5
Noise emissions in the environment measured as sound power (L
2000/14/EC.
6
Reported data for noise pressure level has a typical statistical dispersion (standard deviation) of 1.2 dB (A).
18
Technical data
LC 151
Husqvarna
Single cylinder,
4-Stroke, Forced
Air Cooling, OHV
166
2800
3
2.7
Husqvarna HQT–
7
0.7–0.8
Splash
1.0
0.5
Husqvarna SAE
30
31.1
97
98
WA
LC 151S LB 251S
Husqvarna Husqvarna
Single cylinder, Single cylinder,
4-Stroke, Forced 4-Stroke, Forced
Air Cooling, OHV Air Cooling, OHV
166 166
2800 2800
2.7 2.7
Husqvarna HQT– Husqvarna HQT–
7 7
0.7–0.8 0.7–0.8
Splash Splash
1.0 1.0
0.5 0.5
Husqvarna SAE Husqvarna SAE
30 30
32.6 32.0
97 95
98 96
To replace the engine oil on page 15 for the correct oil
) in conformity with EC directive
WA
LB 256SP
Husqvarna
Single cylinder,
4-Stroke, Forced
Air Cooling, OHV
166
2800
2.7
Husqvarna HQT–
7
0.7–0.8
Splash
1.0
0.5
HusqvarnaSAE
30
33.1
98
98
1924 - 002 - 12.10.2022