Inhaltsverzeichnis
Werbung
Kontrolky
Heat/Cool svieti
Termoelektrický pohon TEP 24 – voliteľné príslušenstvo
Pripojenie:
– na Valve Heat = dvojrúrový systém (vykurovanie alebo chladenie)
• stupeň krytia IP 44
• doba prestavenia polohy 4 min
• celková výška 65 mm
• štandardné montážne závity M 30 × 1,5
• dĺžka kábla 2,5 a 5 m
• bez napätia zatvorené
• napájacie napätie 24 V DC
• príkon <2 W
Safety information
EN
• Wall mounted operating voltage = 24 V DC
• Fan operating voltage = 24 V DC, speed control voltage 0–10 V DC
• IP rating: IP 20
• Electrical installation design must be carried out by suitably qualified person in accordance with the relevant standards.
• Wall convector installation must be carried out by persons with the relevant technical qualification.
• Prior to commisioning the electrical components must he thoroughly inspected in accordance with relevant standards of
the respective country. The user is obliged to provide regular inspections of all electrical components in the periods given
by relevant standards of the respective country.
• ALL WORKS ON THE ELECTRICAL EQUIPMENT WITHIN THE MEANING OF STANDARDS OF THE RESPECTIVE
COUNTRY MUST BE CARRIED OUT BY RELEVANTLY QUALIFIED PERSONS DULLY ACQUINTED WITH THE
RESPECTIVE EQUIPMENT.
• Wall convectors must be disconnected from power supply before commisioning and before all maintanance works.
• Disconnect all wall convectors out of operation for a longer time (eg. in summer) from power supply.
• Electrical wiring must be carried out according to the wall convector electrical diagram.
• Fix the input power cord.
Alterations of the product
• No changes and technical alterations of the products are allowed without prior consultation and approval of the producer.
Unauthorized alteration can have a negative impact on function and safety of the product.
• When handling the product, avoid any steps not given by the Installation instructions provided.
• Do not add any 230 V AC power supply into the wall convector.
Service and maintenance
• Service and maintenance should be carrided out by persons, dully acquinted with the wall convector function.
• Prior to undertaking maintenance or service disconnect the wall convector from power supply and secure against re-
connecting during service work.
Description of electroregulation
Regulation forms a central role in the heating and cooling output of wall convectors with forced convection. Fans and
thermoelectric actuators are powered by 24 V DC and fan rotations are as standard controlled by a voltage of 0–10 V DC.
Standard contents
• Set of EC fans with synchronous motor featuries very low electricity consumption and very quiet operation.
• FCR-BOX electronic regulator which is part of the fan and serves as a terminal block for connecting the cables from power
suppply, thermostat or BMS. It ensures smooth operation of fan at a requested speed and control of thermoelectric actuators.
24
Pwr (zelená)
= pripojené napájacie napätie 24 V DC
= Valve Heat je zapnuté
Werbung
Inhaltsverzeichnis
