Sharp FZ-60SEF Anleitung Seite 2

ENGLISH
Caution
Do not tear the bag until you use the filters because they are in the plastic bag to maintain their
performance of dust collection and deodorization.
Be sure to unplug the power cord of air purifier from the wall outlet.
For understanding the product
Some odor ingredients absorbed by the filters may become separated and may be discharged
through the air outlet and result in additional odor.
Depending on the usage environment, the air outlet odor may become strong after several months.
In this case, purchase an exchange filter FZ-60SEF of the option goods, and replace the filters.
1
Remove the filters
1
Place the unit facing up
Lay the unit on a flat surface such as a
table, making sure not to pinch the power
cord on the rear of the unit.
2
Remove the Front panel
Press in the hook on the
bottom of the Front Panel
and lift to remove.
3
Pull out the Filter frame
and remove the Pre-filter
and Filter separator.
4
Remove the Active carbon
filter (black)
and HEPA filter (white)
which have been used.
2
Soft cloth
2
Hook
1
Filter Frame
Filter separator
Active carbon filter
Table
Front panel
2
Pre-filter
HEPA filter
Filter frame
1
1