Omnitronic OD-22T Bedienungsanleitung Seite 9

This speaker must never be operated or stockpiled in surroundings where splash water, rain, moisture or fog
may harm the speaker. When using smoke machines, make sure that the speaker is never exposed to the
direct smoke jet and is installed in a distance of 0.5 meters between smoke machine and speaker.
When choosing the installation spot, please make sure that the device is not exposed to extreme heat,
moisture or dust. The ambient temperature must always be between -5° C and +45° C. The relative humidity
must not exceed 50 % with an ambient temperature of 45° C.
This product must only be operated in an altitude between -20 and 2000 m over NN.
Operate the speaker only after having familiarized with its functions. Do not permit operation by persons not
qualified for operating the speaker. Most damages are the result of unprofessional operation!
Never use solvents or aggressive detergents in order to clean the speaker! Rather use a soft and damp
cloth.
Please consider that unauthorized modifications on the speaker are forbidden due to safety reasons!
If this speaker will be operated in any way different to the one described in this manual, the product may
suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like
crashes, hearing loss etc.
..............................................................................................................................................................................
INSTALLATION
The speaker can be fastened to the installation area via the wall holder. Before installing the system, make
sure that the installation area can hold a minimum point load of 5 times the system's load (e.g. weight 20 kg -
point load 100 kg). The installation of the device has to be built and constructed in a way that it can hold 5
times the weight for 1 hour without any harming deformation.
When using this speaker system in public or industrial areas, a series of safety instructions have to be
followed that this manual can only give in part. The operator must therefore inform himself on the current
safety instructions and consider them.
Make sure that the area below the installation place is blocked when installing, uninstalling or servicing the
fixture. When installing, uninstalling or servicing the speaker staying in the area below the installation place,
on bridges, under high working places and other endangered areas is forbidden. The device should be
installed outside areas where persons may walk by or be seated.
The operator has to make sure that safety-relating and machine-technical installations are approved by an
expert before taking into operation for the first time and after changes before taking into operation another
time.
IMPORTANT! OVERHEAD INSTALLATION REQUIRES EXTENSIVE EXPERIENCE, including (but not
limited to) calculating working load limits, installation material being used, and periodic safety inspection of
all installation material and the device. If you lack these qualifications, do not attempt the installation yourself,
but instead use a professional structural installer. Improper installation can result in bodily injury and or
damage to property.
Devices in hanging installations may cause severe injuries when crashing down! If you have doubts
concerning the safety of a possible installation, do NOT install the device!
Attachment
The device must only be installed absolutely planar at a vibration-free, oscillation-free and fire-resistant
location. Make sure that the device is installed absolutely planar by using a water level.
The device must be installed out of the reach of people.
This device is only allowed for an installation via the installation equipment. In order to safeguard sufficient
ventilation, leave 50 cm of free space around the device.
9