Assembly - Renkforce RF 100 Bedienungsanleitung

Assembly

Remove the record player from the packaging with its accessories and assembly parts.
Put your record player on a stable, vibration-free and horizontal surface for assembly.
Fig.4 Fig.4
• Push the turntable (2) onto the turntable axis and align one of the openings in the turntable with the drive axis
of the motor (fig.1).
• Remove the adhesive tape that secures the drive belt from the turntable.
• Hold on to the adhesive tape at both ends and place the drive belt around the drive axis (fig.2).
• Remove the adhesive tape.
• Remove the adhesive tape on the other side of the turntable as well (fig.3).
• Put the felt mat (5) on the turntable (fig.4).
• Remove the safety belt from the pick-up head holder (fig. 5a).
• Remove the needle protection from the pick-up system (7) by pulling it off forwards. (fig. 5b).
Fig.1
Fig.2
Fig.5a
Fig.5
Fig.3
Fig.5b
25