Set-Up - Renkforce RF 100 Bedienungsanleitung

Set-Up

Ensure proper ventilation when setting up the device.
Never place the device on any soft surfaces such as a carpet or a bed, etc.
Air circulation also must not be impaired by any objects like magazines, tablecloths, curtains,
etc. This prevents heat dissipation from the product and may lead to overheating (danger of
fire).
When setting up the device, make sure that it has a stable footing and place it on a stable
underground.
Persons can be injured if the device falls down.
When setting up the device, make sure that the connection cables are neither pinched nor
damaged by sharp edges.
Always place cables so that no one can trip over them or be caught in them. There is a danger
of injury.
When selecting a place of set-up, make sure it is not exposed to direct solar radiation,
vibrations, heat, cold and moisture.
Make sure there are no devices with strong electric or magnetic fields such as transformers,
motors, cordless telephones or radio-controlled devices in the vicinity of the device, as they
can cause interferences in the record player.

Never place the device on any valuable or sensitive furniture surfaces without sufficient protection.
• When selecting the set-up location, please take into consideration the room layout such as the whereabouts of
the nearest mains socket etc.
• Set up the record player at a sufficient distance from the loudspeakers to avoid acoustic feedback.
• The area of set-up should be uncoupled from the ground.
24
Operating Instructions

English