About This Operating Manual; The Purpose Of This Manual; Keep The Manual Safe And At Hand At All Times; Symbols And Definitions Used - HEYLO PV 1500 Betriebsanleitung

12 About this operating
manual
These operating instructions (hereinafter referred to
as the manual) enable the operator to use the fan
(hereinafter called the device) safely. It describes
the device manufactured by HEYLO GmbH (herein-
after referred to as HEYLO).
– Please read the manual carefully.
– Follow all safety instructions.
12.1

The purpose of this manual.

The manual serves the company operating the de-
vice and all the staff who use it as a guide and refer-
ence book on the operation and technical aspects of
the device.
The technical data on settings, maintenance and the
electrical features have been prepared for special-
ists who are specially authorized for these areas of
responsibility. Unauthorized persons may not carry
out the work specified here.
12.2 Keep the manual safe and at hand
at all times
The manual must always be kept where the machine
is located. The company operating the device must
make the instructions available to the technical staff
and all the operators of the device throughout the
service life of the device.
12.3

Symbols and definitions used

This section explains the symbols used in this man-
ual.
Instructions
The safety instructions in this manual contain the
following elements:
EN
DANGER
Warning indicating an immediate danger for
people
This safety instruction warns of an immediate dan-
gerous situation which can lead to serious injury or
death.
WARNING
Warning indicating a potential danger for peo-
ple.
This safety instruction warns of a potentially haz-
ardous situation which, if not avoided, could result
in death or serious injury.
CAUTION
Warning indicating a potential danger for peo-
ple.
This safety instruction warns of a potentially haz-
ardous situation which, if not avoided, could result
in minor to moderate injury.
Attention
Warning of possible damage to property.
This safety instruction warns of damage to machin-
ery.
A safety instruction consists of (in addition to the
symbol and the signal word):
– Signal word
– Type and source of hazard
– Effects
– Escape (= measures to escape from the danger)
Fan PV 1500
21 / 36