Grundig KVA 4830 Bedienungsanleitung Seite 30

PREPARATION ____________________________
Installation
Note
Remove any protective films, stickers and any other packing material on the appliance.
7
150mm
150mm
150mm
Choose a safe and stable surface with
an easily reachable power supply
and allow minimum distance from the
sides of the machines.
Filing the water tank
About the protect program:
tection mode will be activated in 15 seconds during brewing process. Hot water button will
lights on control panel.
1. Make sure that the water tank is fully inserted into the machine.
2. Press the hot water button. After the hot water is dispensed, the machine will be in standby
condition.
Warning
When is flashing, the water tank is in low water level and requires filling the water tank.
7
30 ENGLISH
150mm
150mm
Insert the external drip tray. Make
sure it is inserted correctly.
If the water tank is not fully placed into the machine, a pro-
Unwind and straighten the power
cord and insert the plug into the soc-
ket located on the back of the machi-
ne. Insert the other end of the power
cord into a wall socket
with suitable power voltage.
.