Sleep Mode - Philips Avance HR3868/00 Benutzerhandbuch

5
Select a program by pressing a
program button on the panel.
» The blender starts blending as
programmed.
» The timer starts counting down.
•
See table 1 for purposes and
blending time of different
programs.
•
To stop the current blending
program, press the selected
program button again.
•
To switch to manual blending
mode during the blending
process, turn the knob to a
speed setting as needed.
•
To switch to pulse mode during
the blending process, turn the
knob to P several times.
6
Switch off the blender and unplug it
after blending.
» The blender stops blending
when the timer reaches 0:00.
7
Remove the blender jar from the
motor unit.
8
Open the lid and pour out the
ingredients from the blender jar.
5 Manual blending
mode (Fig. 3)
1
Assemble your blender jar as
indicated.
2
Put the ingredients in the jar.
3
Insert the measuring cup and close
the lid.
4
Put the plug in the wall outlet and
switch on the blender.
5
Turn the knob to a speed setting as
needed.
» The blender starts blending.
» The timer starts counting up.
12 EN
•
To switch to pulse blending
mode during the blending
process, turn the knob to P
several times.
6
Turn the knob to speed 0 to stop
blending.
» Let the blender cool down for
5 minutes after blending.
7
Switch off the blender and unplug
it. Then remove the blender jar from
the motor unit.
8
Open the lid and pour out the
ingredients from the blender jar.
6

Sleep mode

Your blender will go into sleep mode
after 3 minutes when there is no
operation and sleep LED (power LED) is
on. You can wake up the appliance and
start manual blending by turning rotary
knob to a speed setting needed.
7 Use the tamper
(Fig. 4)
You can use the tamper to process
very thick mixtures or recipes with less
liquid which cannot be processed well
in a normal blender, e.g. nut butters,
frozen dessert or puree vegetables. The
tamper helps circulation by preventing
air formed.
The tamper is used to stir and push
ingredients into the blades when the
blender is on.
Note: Use the tamper only when the lid
is assembled correctly to the jar to avoid
tamper hitting the blades.
Tips: You can move the tamper up and
down, turn around or push it toward
the side or corner of the jar to help
ingredients circulate.