Herunterladen Inhalt Inhalt Diese Seite drucken

Selecting The Display Colour; Resetting To Factory Settings; External Speaker - Albrecht AE 6199 VOX Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

5.11. Selecting the display colour

Long press the LIGHT button to cycle through 7 different
backlight colours.

5.12. Resetting to factory settings

To reset the device to its factory settings, proceed as follows:
Turn off the radio
Press and hold down the VOX button while turning on the
radio
Release the button
The display shows rS and after a short time the radio
restarts with the factory settings
In most cases, the radio functions have now been restored.

6. External speaker

It is advisable to connect an external speaker depending on
the ambient noise. Typical, commercial radio speakers with
4-8 ohms impedance and a minimum power of 2-4 W can be
used.
Up to a 3 metre long cable can be used. For speakers that will
be used in a vehicle, make sure that a two-pin 3.5 mm jack is
used and that none of the speaker connections are attached to
the vehicle frame.
31

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis