Care And Cleaning - Franke FMA 607 WH/XS Bedienungsanleitung Und Installation

CARE AND CLEANING

• Open the Panel by pulling it.
• The panel can be locked in any position.
• Clean the outside with a damp cloth and neutral detergent.
• Clean the inside using a damp cloth and neutral detergent; do
not use wet cloths or sponges, or jets of water; do not use
abrasive substances.
CLEANING METAL SELF- SUPPORTING GREASE FILTERS
• The filters must be cleaned every 2 months of operation, or
more frequently for particularly heavy usage, and can be
washed in a dishwasher.
• Pull the comfort panels to open them.
• Remove the filters one by one pushing them towards the
back side of the hood unit and simultaneously pulling
downwards.
• Any kind of bending of the filters has to be avoided when
washing them. Before fitting them again into the hood make
sure that they are completely dry. (The colour of the filter
surface may change throughout the time but this has no in-
fluence to the filter efficiency).
• When fitting the filters into the hood pay attention that they
are mounted in correct position the handle facing outwards.
• Close the comfort panel.
EN
Opening Panel
Grease filters
1
2
1
12