BOMANN EHBC 7935 IX Bedienungsanleitung, Garantie Seite 29

Operation overview
The detailed description of the individual controls can
be found in the following sections.
Control panel
1 Cooking zone level controls
2 Cooking zone operating control lamp
3 Oven function selector control
4 Oven temperature selector control
5 Oven temperature control lamp
Cooking zone level controls
CAUTION:
Only turn the level controls clockwise and back
again. Otherwise, the controls will be damaged.
The temperature of the cooking zones is set sepa-
rately for each cooking zone via the assigned control.
Position of cooking zone
0 Off-position
1 Lowest setting (keep food warm)
6 highest setting (quick heating and cooking, roast-
ing)
Operating control lamp
The operation control lamp shows the operation of
the cooking zones. It lights up as soon as a cooking
zone is put into operation and goes out when all the
level controls point to the off position.
Function selector control
The function selector control is used to set the heat-
ing mode. To set a function, turn the control to the
symbol with the desired heating mode.
Temperature selector control
CAUTION:
Only turn the temperature selector control clockwise
and back again. Otherwise, the control will be dam-
aged.
The temperature selector control is used to set the
oven temperature. The thermostat allows tempera-
ture setting in the range from 50°C to 250°C.
Temperature control lamp
The control lamp indicates heating operation.
If the light goes out, the set oven temperature has
been reached.
During operation, the oven must be reheated again
and again to maintain the set temperature. During re-
heating, the control lamp lights up (thermostat func-
tion).
NOTE:
If the recipe recommends placing the food in the pre-
heated oven, this should not be done before the con-
trol light first goes out.
Switching operation on and off
Oven
The oven is equipped with various functions, see
"Oven functions"
. Set the required operating condi-
tions.
29