Geberit HS01 Instandhaltungsanleitung Seite 15

Safety
About this document
This document applies to the professional maintenance of the following products:
• Geberit HS01 hygiene flush unit
• Geberit HS01 hygiene flush unit, control unit
Target group
Maintenance and repair work on this product may only be performed by skilled persons. A skilled
person is a person who, due to their specialist education, training and/or experience, is able to
recognise risks and avoid hazards that may arise when using the product.
Intended use
Geberit hygiene flush units are intended for automatic, periodic water replacement in drinking water
installations. Using them for any other purpose is deemed improper. Geberit accepts no liability for
the consequences of improper use.
General safety notes
• Do not modify the product or add any additional modules.
• Repairs may only be carried out by a skilled person using original spare parts and accessories.
• Provide a stop valve upstream of the Geberit HS01 hygiene flush unit.
• Do not remove the battery during a flushing process. Solenoid valve does not close automatically if
battery is removed.
• Protect from direct sunlight. Exposure to direct sunlight can discolour the control unit cover.
Safety notes for HS01 hygiene flush unit with trap
• Only operate the Geberit HS01 hygiene flush unit in a vertical position.
• Mount the Geberit HS01 hygiene flush unit on the wall using 4 fastening screws.
• Do not install an additional trap in the discharge pipe. The Geberit HS01 hygiene flush unit has an
integrated trap.
• Should the drain become clogged, water can leak from the Geberit HS01 hygiene flush unit.
Safety notes for Geberit control unit for HS01 hygiene flush unit
• Only connect the control unit to a securely mounted supply pipe.
• Do not immerse the control unit in water.
• Ensure a distance of at least 20 mm between the outlet and discharge pipe (free outlet in
accordance with DIN EN 1717:2011-08).
18014406212999819 © 09-2022
970.124.00.0(01)
EN
15