Power Button - Beko ATP 6100 Bedienungsanleitung

Operating Instructions
5
5.1 İmportant notes
Carefully unpack your air purifier.
•
Select a firm level place where there are no
•
obstructions to the air inlet grill or air outlet.
Remove all PE bags from filters before use.
•
Do not point air outlet towards wall.
•
Controls Introduction
6

Power button

Touch the Power button, the machine will
start running under the default "AUTO" set-
ting, and the indicator of "AUTO" setting will
illuminate.
Fan speed button
There are 4 speed settings including Low,
Medium, High and AUTO for selection. Touch
the Fan speed button to select your desired
speed setting.
Timer button
The timer allows you to run your air purifier
at your convenience, for up to 8 hours. With 3
settings including 2hr, 4hr and 8hr.
Dust sensor
This Air Purifier has a built-in smart dust sen-
sor which can detect the air quality of current
environment automatically, and the air qual-
ity can be shown by the air quality indicator
which can illuminate in blue, pink and red
when the air quality is very good, good and
bad accordingly.
10 / 120 EN
10 / EN
Ionizer rocker switch
This appliance has an independent Ionizer
rocker switch equipped at the bottom of body,
feature which, when turned on, releases neg-
ative ions into outgoing filtered air to help the
air purification process.
Ionizer rocker
switch
Fig.4
Air purifier/ Instruction Manual
Air purifier/ Instruction Manual