Teesa TSA0801 Bedienungsanleitung Seite 10

10
1. Open the battery door at the back of the scale and insert the battery. Pay attention to
correct polarization. The LCD will turn on, as below.
2. Close the battery door and wait until "0.0 kg" is shown on the display.
EN
3. Repeatedly press UNIT to select desired unit.
4. Place the scale on a flat, firm ground.
5. Stand on the platform directly to switch on.
6. Stand still and the weight data will be locked automatically with blinking twice when
stable. Then the scale will turn off after about 10 s.
Note: if you want to measure once again, please step off, then step on the platform again.
If there is no load placed on the scale, the device will turn off automatically after about 10
seconds.
OPERATION
Owner's manual