Using The Clamp; Battery Capacity Indicator - Westfalia Wasserwelten 93 73 73 Originalanleitung

4. Insert the battery (11) into the
battery compartment
switch on the rain barrel pump,
push the ON/OFF switch (2) in
direction I. To switch off the
pump push the switch (2) in
direction O.
5. When not in use, remove the
battery from the battery com-
partment. Depress the release button on the battery and pull out the
battery from the compartment.
 Make sure that water and moisture cannot get into the control unit.
 Make sure that no particles bigger than approx. 1 mm are sucked into
the pump.
 Never pull the rain barrel pump by the cord.
 Avoid dry running of the pump! Dry running is operating the pump
without water in the casing.

Using the Clamp

1. If necessary, fix the rain barrel pump with the
included clamp on the rain barrel.
2. Screw the tightening screw (13) with a suitable
hex key (size 5) hand tight on the rain barrel.
The clamp will protect the pump from tipping
over.

Battery Capacity Indicator

The illuminated LED indicate the battery capacity.
LED
Capacity
When the forth and last LED turns off, the pump will stop working. Switch
of the pump. Remove the battery from the compartment and charge the
battery.
(4).
4
100 %
Operation
To
3
75 %
18
2
50 %
Clamp
1
25 %