The Wash Programme Does Not Start - Miele PWM 909 SOM Kurzgebrauchsanweisung

en - Problem solving guide

The wash programme does not start

Problem
The display remains dark,
and the Start/Stop sensor
control does not light up
or flash.
The following appears in
the display: F -Door lock
fault. You can continue by
pressing the "Start/Stop"
button
The display is dark and the
Start/Stop sensor control
is flashing slowly.
The programme is on the
pre-start screen and the
Start/Stop sensor control
is not flashing.
80
Cause and remedy
There is no power to the washing machine.
Check whether the washing machine is switched on.

Check whether the washing machine is connected to the

power supply.
Check whether the fuse has tripped.

The washing machine has switched off automatically to
save energy.
Switch the washing machine back on with the  button.

The door is not locked properly. The door lock could not
engage.
Close the door again.

Start the programme again.

If the fault message appears again, contact the Cus-
tomer Service Department.
The display has switched off automatically to save energy.
Touch any of the controls. The display switches back on.

The drum door has been pushed to but is not closed cor-
rectly.
Check whether the drum door is closed correctly.
