Medion LIFE P13225 Kurzanleitung Seite 91

NETWORKED Activate/deactivate the Wake-On LAN/Wake-On Wireless LAN function (WoL/
STANDBY MODE
WoWLAN). This enables you to switch on the smart TV via a different device
(e.g. a smartphone with the MEDION® Life Remote App). Both devices must
be connected to the same network via LAN or Wi-Fi for this purpose. Select
the
control needs to be connected to the TV once when it is switched on. The
control function only works when the TV is in standby mode.
 Exit the network settings by pressing
3.7.2. Receptiom method
Before the station search starts, select the following options:

SCAN ENCRYPTED CHANNELS
searched for.

SELECT FAVOURITE NETWORK TYPE
use several types of reception, you can select the types below with
 Select
with
NEXT 
3.7.3. Cable digital
If you have previously activated the reception type
for the network search. If it should be necessary, you can adjust the
and the
NETWORK ID
14
Network settings
setting to activate this function. The device being used as a remote
ON
O K
1
Select Broadcast Type:
Scan Encrypted Channels
Select favourite network type
D. Aerial
D. Cable
Satellite
Analogue
: Use to select whether encrypted channels should also be

: Use
and confirm with
O K
correspondingly.
SEARCH STEP
.
2 3 4 5
On
None
to select the preferred reception method. If you

.
DIGITAL CABLE
Next
OK BACK EXIT HOME
and activate with

, you can now make settings
NETWORK, FREQUENCY
.
O K
, the