Cleaning And Maintenance; Replacing The Fuse - EuroLite LED FE-300 Bedienungsanleitung

Motor
5
Strobe UV-LEDs
6
Internal programs
7
Speed

CLEANING AND MAINTENANCE

The outside of the device should be cleaned periodically to remove contaminants such as dust etc. The
lenses, in particular, should be clean to ensure that light will be emitted at maximum brightness.
1 Disconnect the device from power and allow it to cool before cleaning.
2 Clean the surface with a soft lint-free and moistened cloth. Never use alcohol or solvents as these may
damage the surface. Make sure that no liquids can enter the device.
3 The device must be dry before reapplying power.
There are no serviceable parts inside. Do not open the housing. Do not try to repair the device by yourself as
this may result in damage. Maintenance and service operations are only to be carried out by authorized
dealers. Should you need any spare parts, please use genuine parts. Should you have further questions,
please contact your dealer.

Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
1 Disconnect the device from power and allow it to cool.
2 Open the fuse holder of the mains connection with a fitting screwdriver.
3 Remove the old fuse from the fuse holder and replace it with a new fuse.
4 Carefully push the fuse holder back into its position before reapplying power.
011 – 130 Motor clockwise (slow > fast)
131 – 255 Motor counterclockwise (slow > fast)
000 – 004 UV OFF
005 – 009 UV ON
010 – 255 UV Strobe with increasing speed (0-100%)
000 - 009
No function
010 - 019
Auto program: 1
020 - 029 Auto program: 2
030 – 039
Auto program: 3
040 – 049
Auto program: 4
050 – 059
Auto program: 5
060 – 069
Auto program: 6
070 – 079 Sound control program: 1
080 – 089
Sound control program: 2
090 – 099
Sound control program: 3
100 – 109
Sound control program: 4
110 – 119
Sound control program: 5
120 – 255
Sound control program: 6
000 – 255
Auto/Sound programs speed ( slow > fast)
28/32 00138970, Version 1.0