After-Sales Service And Application Service - Bosch GSC 2,8 Professional Originalbetriebsanleitung

14 | English
Changing the upper cutter (see figure B)
Both sides of the upper cutter (8) can be used.
Fully unscrew the fastening screw (9) of the upper cutter
and remove the upper cutter (8).
Turn the upper cutter (8) as shown in the figure B or place a
new upper cutter against the striker (7). Fasten the upper
cutter with the fastening screw (9).
Check the cutter clearance b as described above.
Regrinding the cutter (see figure C)
Replace or regrind worn cutters in good time. Only sharp
tools achieve good cutting capacity and make the machine
last longer.
When regrinding the cutters, take care that the cutting
angles are maintained.
Check the cutting angle with the setting gauge (13).
Accessories/replacement parts
Cutter set
Setting gauge
Hex key (width across flats 5 mm)
Hex key (width across flats 2.5 mm)

After-Sales Service and Application Service

Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
India
Bosch Service Center
69, Habibullah Road, (Next to PSBB School), T. Nagar
Chennai – 600077
Phone: (044) 64561816
Bosch Service Center
18, Community Center
Phase 1, Mayapuri
New Delhi – 110064
Phone: (011) 43166190
Bosch Service Center
Shop no 7&8, Aspen garden
Walbhat road , Goregaon (E)
Near to Ram Mandir Railway Station
Mumbai – 400063
Mobile: 09819952950
Malaysia
Robert Bosch Sdn. Bhd.(220975-V) PT/SMY
No. 8A, Jalan 13/6
46200 Petaling Jaya
Selangor
Tel.: (03) 79663194
1 609 92A 7MN | (27.04.2022)
Toll-Free: 1800 880188
Fax: (03) 79583838
E-Mail: kiathoe.chong@my.bosch.com
www.bosch-pt.com.my
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
Israel
Ledico Ltd.
31 Lazrov Street
2 607 010 025
P.O. Box 6018 Rishon Le Ziyon
2 607 970 001
service@ledico.com
1 907 950 006
Korea
Tel.: 080-955-0909 (Hotline)
1 907 950 003
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Disposal
The power tool, accessories and packaging should be re-
cycled in an environmentally friendly manner.
Only for EU countries:
According to the European Directive 2012/19/EU on Waste
Electrical and Electronic Equipment and its implementation
into national law, power tools that are no longer usable must
be collected separately and disposed of in an environment-
ally friendly manner.
If disposed incorrectly, waste electrical and electronic
equipment may have harmful effects on the environment and
human health, due to the potential presence of hazardous
substances.
Only for United Kingdom:
According to Waste Electrical and Electronic Equipment Reg-
ulations 2013 (2013/3113), power tools that are no longer
usable must be collected separately and disposed of in an
environmentally friendly manner.
Do not dispose of power tools along with
household waste.
Bosch Power Tools