Filter Function - Haier SBS 90 Serie Bedienungsanleitung

Super-Freeze function (Super-Frz)
1. When the display screen is unlocked, press the button "E" (Super-Frz. selector),
the buzzer rings once, the indicator "e1" (Super-Freeze function) illuminates,
and then the Super-Freeze function will be turned on.
2. When the indicator "e1" (Super-Freeze function) illuminates, press the button
"E" (Super-Frz. selector), the buzzer rings once, the indicator "e1" (Super-Freeze
function) goes off, and then the Super-Freeze function will be turned off.
EN
3. After the Super-Freeze function is turned on, the refrigerator will automatically
turn off the function when it reaches the set condition. If you want to exit manu-
ally, you can press the button "E" (Super-Frz. selector) to turn it off.
Indicator off
Notice
Under Super-Freeze state, the freezer temperature cannot be adjusted. If either
button "D1" (Temperature adjustment button "-") or button "D2" (Temperature
adjustment button "+") is pressed to adjust the temperature of freezer, the indi-
cator "e1" (Super-Frz. indicator) will flash with a prompt sound to indicate that this
operation cannot be carried out.
In the state of Super-Freeze function, the Auto-set function cannot be turned on
at the same time due to different control modes. When you choose one function
that conflicts with another function, the original function will automatically exit.

Filter function

When the refrigerator operates for six months, the reminder indicator "c3" (Filter
Reset function) will light up to remind users to replace with a new filter. When filter is
replaced, hold the button "C" (Filter Reset function selector) for 3 seconds to cancel
the reminder, the timing will reset with buzzer ringing.
Indicator on
Notice
The normal service life of filter is six months. It is recommended to replace the
filter every six months.
18
Use
Press 1 time
Hold for 3s
Indicator on Press 1 time Indicator off
Indicator off