Description; Technical Data - Nederman 10500133 Bedienungsanleitung

EN

3 Description

The Welding and Grinding table is used for extracting fumes, dust and particles from welding and grinding oper-
ations. It can also be used in explosive environments, if grounded accordingly and be used to suspend the weld-
ing torch when not in use.
NOTE!
The Welding and Grinding table is not suitable for cutting.
Underneath the working area a dust drawer takes care of the heavy dust. The drawer can easily be emptied
from the front of the Welding and Grinding table. The duct connection for the external fan is located on top of
the Welding and Grinding table and it is recommendable to use a filter device between the table and the fan.

3.1 Technical data

Welding and
Grinding table
Welding and
Grinding table
Welding and
Grinding table
Dimensions
Material de-
scription
Weight
Dust drawer
volume
Recovery level
Max. distrib-
uted load on the
table
8
Welding and Grinding table
W1 (mm) W2 (mm)
900 1000
1355 1455
2000 2100
See Figure 1
2 mm powder coated steel, colour code: RAL 9005
175, 260 or 360 kg
45, 68 or 100 litre
100 % of weight
500 kg
∅1 (mm)
c/c (mm)
160 970
250 1425
2 x 250c/c 990 2075
Airflow (m3/h)
1000 - 2000
2000 - 3000
3000 - 4000