Monitor Connections - Icy Box DisplayLink IB-DK4080AC Bedienungsanleitung

Important:
1. When connecting the USB Type-C
Chromebook , the mouse to be connected to the USB 3.2 Gen 1 Type-A port will
™
not work immediately; it will have a seconds' delay. This problem also occurs with
similar Type-C adapters (including Apple original 3 in 1 adapter) when connected
®
with a Chromebook
2. Attention! When plugging and unplugging a Power Delivery power supply
via the Type-C interface of the IB-DK4080AC, the other interfaces in use may be
®
shortly disconnected and immediately reconnected. To avoid data loss during data
transfer, stream interruptions or similar, DO NOT connect or disconnect the Power
Delivery power supply while any data transfer is in progress.
3. Depending on the load on the device, the aluminium housing used for cooling
may heat up more intensively in order to dissipate the heat generated to the outside
and thus protect the internal components from overheating. This does not represent
a malfunction of the device. Please ensure that the device is not covered and a
sufficient air supply is guaranteed.
Displays
Please set up your display settings according to your operating system and
requirements. For detailed information refer to the corresponding operation manual
and description of your operating system.

Monitor connections

Connection of one computer to two DisplayPort
You can set up dual displays by using the video output ports of the IB-DK4080AC
(2x DisplayPort , or 2x HDMI
™
Connect your monitors to the DisplayPort
DisplayPort / HDMI
™
It is recommended to use monitors of the same size, type and resolution for a dual
connection. Same monitor type means that the monitors have the same native
resolution and display refresh rate.
Manual IB-DK4080AC
®
.
™
or both mixed).
®
cables (not included).
®
plug of the IB-DK4080AC to a
or two HDMI
™
/ HDMI interfaces by using certified
™ ®
monitors
®