Icy Box DisplayLink IB-DK4080AC Bedienungsanleitung Seite 4

Legacy USB standards
USB 3.0 = USB 3.1 (Gen 1) = USB 3.2 Gen 1
USB 3.1 = USB 3.1 (Gen 1) = USB 3.2 Gen 1
USB 3.2 (Gen 1x2)
Requirements
- Windows , macOS
®
- Installed DisplayLink
- The device is compatible with Thunderbolt
- No power supply included (only necessary for Power Delivery via Type-C
Starting up — Installation of the driver!
Caution: Do not connect the DockingStation to your computer before installing the
driver from the download area of:
https://www.synaptics.com/products/displaylink-graphics/downloads
1. Select your operating system and download the correct driver from the
webpage mentioned above
2. Click on the executable file of the related version
3. Follow the instructions and finish the driver installation
4. Connect the DockingStation to a supported USB Type-C
on the PC
5. Restart the PC
6. The IB-DK4080AC is ready for use.
Note!
Chrome OS : The DisplayLink
™
Starting up
Connect the integrated USB Type-C
DockingStation to a supported computer (USB 3.2 Gen 1 at least).
Note!
When using a computer without Power Delivery support via a USB Type-C
using a USB Type-A port (via adapter), please note the following:
Information about the attached USB Type-C
For a better connection compatibility with host computers that only have a USB 3.2
Gen 1 Type-A interface, we have added an additional USB Type-C
adapter
Manual IB-DK4080AC
USB version information
Current USB standards
= USB 3.2 Gen 1x2
, Chrome OS , Android
® ™
(Synaptics) drivers
®
drivers are already pre-installed under Chrome OS
®
cable or the included Type-A adapter of the
®
= 5 Gbit/s
= 5 Gbit/s
= 20 Gbit/s
, Ubuntu (Linux)
™
3 / 4 Type-C equipped computers
™ ®
to Type-A adapter:
®
Data transfer rate
)
®
or Type-A port
®
port or
®
to Type-A
®
.
™