Jabra GO 6470 Kurzanleitung Seite 8

If you are answering a call, then begin talking. If you
are making a call, then dial the number on your desk
phone.
4. When you are done talking, close the connection
from your desk phone to the phone network by
doing one of the following:
- If your desk phone has a headset button, then press
the headset button.
- If you do not have an electronic hook-switch,
handset lifter or headset button, then hang up the
handset on your desk phone.
Note: If your desk phone has an electronic
hookswitch or GN1000 Remote Handset Lifter,
then the connection closes automatically.
US
5. Close the audio channel from your headset to your
desk phone by doing one of the following:
- Touch the end-call icon on the touchscreen.
- tap the multifunction button at the back of your
headset.
- Remove the headset and place it in its cradle on the
base.
to place a call over a mobile phone or softphone:
1. Put on your headset.
2. Dial your mobile / softphone and press the call
button as usual. The base detects that you have
placed a call and opens the connection to your
headset automatically.