Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
After unpacking the product, check for any damage during transport. In case of problems, contact the dealer
or the After-Sales Service.
For built-in dimensions and installation instruction, see in below figures
Ÿ
The distance between the underside of the appliance and the separator panel must respect the
dimensions given in the figure (mini. 50mm).
Ÿ
In order to ensure the correct operation of the product, do not obstruct the
clearance (min. 20 mm) on the worktop for air flow out.
Ÿ
If an undertop oven is installed, make sure the oven is equipped with a cooling system.
Ÿ
Do not install the hob above a dishwasher or washing-machine, so that the electronic circuits do not
come into contact with steam or moisture which could damage them.
14
minimum required
Werbung
Inhaltsverzeichnis
Fehlerbehebung
