Auto Switch Off; Residual Heat Indicator - K&H IN-6804FSL Gebrauchsanleitung

Pause
Pause-Button:
When this button is pressed, the cooktop stops working. Press the Button again and the cooktop
begins to work again.
FLEX ZONE FUNCTION
When you want to use the flex zone ,press the button
Please do not place hot pots or pans on the keypad! This could cause damage.

Auto switch off

The hob will automatically switch off when you did not set cooking time, forgot to switch off the hob, and did
not operate the hob at all. The relationship between the power level and default switch off time is shown in
below figure.
CONTROL PANEL WARNINGS

Residual heat indicator

The hob is fitted with a residual heat indicator for each cooking zone. These indicators alert the user
when cooking zones are still hot.
If the display shows
lit, that zone can be used, for example, to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes off.
Incorrect or missing pot indicator – Error code "E0"
If you are using a pot that is not suitable, not correctly positioned or not of the correct dimensions for
your induction hob, the symbol "E0" mean "no pot" will appear in the display (see figure at side). If
no pot is detected within 180 seconds, the hob switches off.
Power level
1-3
4-6
7-9
, the cooking zone is still hot. If the residual heat indicator of a given cooking zone is
,the relevant two zones will work together.
The hob automatically switch off after
8 hours
4 hours
2 hours
17