Safety Systems - K&H NC-10208 Gebrauchsanweisung

Timer
After you have selected the power press the timer key
Timer confirmation:
With repeated pressing onto timer key choose the zones you want to set as the LED light showing.
The display shows "00". With the keys "0-9" set the time in 1-minute steps (max. 99 min.) After 5
seconds no number level key be pressed, the time will start timing and the display will indicate the
countdown time until to "00". If the two zones has been set different time, the display will indicate the
less time setting zone.
Timer cancellation
By pressing onto timer key choose the zone you want to cancel the timer. Then press number level
key"0" two times and the timer function will be cancelled.

Safety systems

In order to protect the electronics from overheating if the control unit detects excessive heat it will
switch off the hotplate closest to the sensors and the letter H will appear on the display. This hotplate
can be activated when the temperature of the electronic unit returns to normal.
Each hotplate is equipped with an interior temperature limiter that switches off the hotplate if the
radiant surface is heated excessively.
If any cracks appear in the radiant surface, immediately disconnect it from the mains. Do not use any
part of the cooktop until a new radiant surface has been fitted.
Automatic
If a hotplate is left on accidentally, it will automatically be switched off after a period of time has
elapsed, depending on the power level that has been selected
Setting Time (hour)
1-3 8
4-6 4
7-9 2
Key Lock (Childlock)
To ensure the safety of children, the ceramic hob is fitted with an interlock device. To lock: hold down
the "Inter lock" key for 3 seconds; the hob then goes into "Interlock" mode, the timer shows "L0" and
the rest of the keys are disabled. To unlock hold down the lock key for 3 seconds and the hob will
return to normal working.
.