Fm-Zulassung; Atex-Zulassung - Siemens SIMATIC S7-1500 Systemhandbuch

FM-Zulassung

Factory Mutual Research (FM) nach
• Approval Standard Class Number 3611, 3600, 3810
• ANSI/UL 121201
• ANSI/UL 61010-1
• CAN/CSA C22.2 No. 213
• CAN/CSA C22.2 No. 61010-1
• CAN/CSA C22.2 No. 0-10
APPROVED for use in Class I, Division 2, Group A, B, C, D T4;
Class I, Zone 2, Group IIC T4
Installation Instructions for FM
• WARNING - Explosion Hazard - Do not disconnect while circuit is live unless area is known
to be non-hazardous.
• WARNING - Explosion Hazard - Substitution of components may impair suitability for Class
I, Division 2 or Zone 2.
• This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D; Class I, Zone 2,
Group IIC; or non-hazardous locations.
WARNING: EXPOSURE TO SOME CHEMICALS MAY DEGRADE THE SEALING PROPERTIES OF
MATERIALS USED IN THE RELAYS.

ATEX-Zulassung

Nach EN 60079-15 (Electrical apparatus for potentially explosive atmospheres - Part 15: Type
of protection "n") und EN 60079-0 (Electrical apparatus for potentially explosive gas
atmospheres - Part 0: General Requirements).
ODER
Nach EN 60079-7 (Electrical apparatus for potentially explosive atmospheres - Part 7:
Increased safety "e") und EN IEC 60079-0 (Electrical apparatus for potentially explosive gas
atmospheres - Part 0: General Requirements).
Redundantes System S7-1500R/H
Systemhandbuch, 01/2023, A5E41814780-AE
Technische Daten
15.1 Normen und Zulassungen
413