Base Settings; Ring Tone; Ringer Volume - Silvercrest SDT 1.7 A3 - IAN 279401 Bedienungsanleitung

SilverCrest SDT 1.7 A3

Base Settings

This menu allows you to perform more settings for the base. Proceed as follows to open this menu:

While the handset is in standby mode, press the Menu button [12] to show the menu.

Press the  or  buttons on the directional control [4] to select the "Base Settings"
menu.

Press the Phonebook button [3] to confirm your selection.

Press  or  on the directional control [4] to select the desired menu item and then
press the Phonebook button [3] to confirm.
De-register
This menu item allows you to de-register a handset that is currently registered with the base.
Proceed as follows:

Enter the phone's four-digits PIN code (default 0000) and press the Phonebook button
[3] to confirm.

Select the handset that you want to de-register (1 to 4).

Press the Phonebook button [3] to confirm your entry.

After the handset has been de-registered, a confirmation beep will sound.

Instead of the name of the handset, the de-registered handset display [2] will show "Not
Registered".
It is not possible to de-register the handset you are using. It is only possible to de-register
other handsets.

Ring Tone

Press the  or  buttons on the directional control [4] to select a ringtone. There are 10 ringtones
to choose from. Press the Phonebook button [3] to save. A confirmation beep can be heard.

Ringer Volume

You can adjust the ringer volume in 5 levels (5 = very high; 1 = very low). Press the  or 
directional control buttons [4] to set the desired volume. Or select "Volume Off" to disable the
ringtone. To save the selected setting, press the Phonebook button [3]. A confirmation beep can be
heard.
84 - English