Ring Tone; Ringer Volume; Handset Name; Keypad Beep - Silvercrest SDT 1.7 A3 - IAN 279401 Bedienungsanleitung

Ring Tone

External
Press the  or  buttons on the directional control [4] to select a ringtone for external call. There
are 19 ringtones to choose from. Press the Phonebook button [3] to save. A confirmation beep can
be heard.
Internal
Press the  or  buttons on the directional control [4] to select a ringtone for internal call. There
are 19 ringtones to choose from. Press the Phonebook button [3] to save. A confirmation beep can
be heard. Please note that a second handset is needed to make internal calls.

Ringer Volume

You can adjust the ringer volume in 5 levels (5 = very high; 1 = very low). Press the  or 
directional control buttons [4] to set the desired volume. Or select "Volume Off" to disable the
ringtone. To save the selected setting, press the Phonebook button [3]. A confirmation beep can be
heard.

Handset Name

Here you can change the name of the handset (default "Handset"). The handset name can contain
up to 11 characters.
Press the Menu button [12] to erase the existing name character by character. Enter the handset
name via the numeric keys [6]. Press the Asterisk button [10] to toggle between upper case and
lower case. You can select a different character set by keeping the Hash button [7] pressed. The
currently selected input method will be indicated in the upper-right corner of the display. You can
press the 0 or 1 buttons to enter special characters and press 0 for spacebar. Press the Phonebook
button [3] to confirm your entry. A confirmation beep can be heard.
The entered name will be suffixed by the number of the handset when shown on the
display [2].

Keypad Beep

Press the  or  directional control buttons [4] to enable or disable the keypad beep. The
confirmation beep is not affected by this setting. To save the selected setting, press the Phonebook
button [3]. A confirmation beep can be heard.
SilverCrest SDT 1.7 A3
English - 81