SilverCrest SDT 1.7 A3
Contrast
Here you can set the display contrast in 8 levels (1=low contrast; 8=high contrast). Press the or
directional control buttons [4] to set the desired contrast. To save the selected setting, press the
Phonebook button [3]. A confirmation beep can be heard.
Auto Talk
If the handset is on the base when an incoming call arrives, the call can be accepted automatically
by removing the handset from the base. Press the or directional control buttons [4] to switch
this function on or off. To save the selected setting, press the Phonebook button [3]. A confirmation
beep can be heard.
Backlight Time
This lets you choose how long the display should stay illuminated after pressing a button. The
possible values are 10S, 20S, 30S or 40S. Press the or directional control buttons [4] to
select the desired option. Press the Phonebook button [3] to confirm your selection. A confirmation
beep can be heard.
Confirm Beep
Press the or directional control buttons [4] to enable or disable the confirm beep. To save the
selected setting, press the Phonebook button [3]. A confirmation beep will sound if it was not
disabled at this time.
Select Base
This allows you to select the base where you want to register a handset. As you will normally have
one base only, you can use the default setting "Auto". Where several bases are available, you can
use the "Manual" option to select the desired base manually from the list. After an available base a
"+" is shown in the list. Please note that the handset must be located within RF range of the base.
Language
Set the language for the handset as follows:
Press the or directional control buttons [4] to select the desired language (e.g.
"ENGLISH") from the list. The following languages are available: English, French,
Spanish, German and Italian.
Press the Phonebook button [3] to confirm your selection.
A confirmation beep can be heard.
82 - English