Registration; Hs Default - Silvercrest SDT 1.7 A3 - IAN 279401 Bedienungsanleitung

Registration

Registration
You can register up to 4 handsets with one base. By default, the handset supplied has already
been registered with the base (Base 1). To register a de-registered or a new handset with the base,
proceed as follows:
Notice for using handsets from different manufacturers
If you want to register third-party DECT handsets that support the GAP standard with
your SilverCrest base, please read the documentation of their manufacturers. However,
it cannot be guaranteed that third-party handsets will be fully compatible even when
using the GAP standard.

Press the  or  directional control buttons [4] on the handset to select the base from
the list to which you want to register the handset. Then press the Phonebook button [3].

Enter the phone's four-digits PIN code (default 0000) and press the Phonebook button
[3] to confirm.

The display [2] reads "Searching" and the number of the available base.
Notice for using bases from different manufacturers
If you want to register the SilverCrest handset with the base of a different manufacturer
that supports the GAP standard, please read the documentation of the third-party
manufacturer. However, it cannot be guaranteed that the SilverCrest handset will be
fully compatible even when using the GAP standard.

Press and hold the Paging button [13] on the base for about 5 seconds. The base starts
searching for handsets.

As soon as the handset has established a connection to the base, a beep can be heard
and the name and number of the handset are shown on the display [2].

Hs Default

This lets you reset the handset. To do so, you must enter the 4-digit PIN (default 0000). Press the
Phonebook button [3] to confirm your entry. The language, all sound settings and all call lists are
reset. The phonebook will be preserved.
SilverCrest SDT 1.7 A3
English - 83