Operation Description - Siemens SITRANS LR200 Kurzanleitung

1.4. Units
Sensor measurement units.
Options
1.5. Operating Mode
Operation
SERVICE
LEVEL
SPACE
DISTANCE
a)
1.6. Low Calibration Point
Distance from sensor reference point to Low Calibration Point: usually process empty level.
Values
1.7. High Calibration Point
Distance from sensor reference point to High Calibration Point: usually process full level.
Values
1.8. Apply? (Apply changes)
In order to save the Quick Start settings it is necessary to select Yes to apply changes.
Options
Press Mode
A5E31993614
Downloaded from www.Manualslib.com
M, CM, MM, FT, IN
distance
space
level
Description
NO Measurement and associated loop current are not
updated, and the device defaults to Fail-safe mode
Distance to material surface
Distance to material surface
Distance to material surface
For more details on Fail-safe Mode refer to the full manual.
Range: 0.00 to 20.00 m
Range: 0.00 to 20.00 m
YES, NO, DONE (Display shows DONE when Quick Start is successfully
completed.)
to return to Measurement mode. SITRANS LR200 is now ready to operate.
SITRANS LR200 (HART) – QUICK START MANUAL
manuals search engine
sensor
reference
point
high cal.
point
low cal.
point
a)
.
Reference point
Low Calibration Point
High Calibration Point
Sensor reference point
Page EN-17