Siemens SITRANS LR200 Kurzanleitung Seite 15

Fault present indicators
Navigation view
• A visible menu bar indicates the
• A band halfway down the menu
• The depth and relative position of
• A deeper band indicates fewer items.
Parameter view
parameter
name
Handheld Programmer (Part No. 7ML1930-1BK)
Ordered separately.
C
1)
2)
3)
A5E31993614
Downloaded from www.Manualslib.com
When a fault is present the fault code and an error message are
S: 0 LOE
displayed in the text area (7), and a service-required icon appears in the
device status location (8)
menu list is too long to display all
items.
bar indicates the current item is
halfway down the list.
the item band on the menu bar indicates the length of the menu list, and approximate
position of the current item in the list.
1) 2) 3)
Key
New value is displayed in LCD secondary region.
Opens the menu level last displayed in this power cycle, unless power has been cycled since exiting
PROGRAM mode or more than 10 minutes have elapsed since PROGRAM mode was used. Then top
level menu will be displayed.
Opens the top level menu
SITRANS LR200 (HART) – QUICK START MANUAL
manuals search engine
current
menu
menu
bar
item
band
Edit view
parameter
number
parameter
value/
selection
Function in Measurement mode
1)
Updates the loop current
Updates internal enclosure temperature reading
Updates echo confidence value
Updates distance measurement
Mode opens PROGRAM mode
RIGHT arrow opens PROGRAM mode
UP or DOWN arrow toggles between linear units and %
current
item
number
current
item
.
1)
.
1)
.
1)
.
2)
.
3)
.
Page EN-13