Installation - Siemens SITRANS LR200 Kurzanleitung

Note:
• Hazardous (continued)
• Marine

Installation

WARNINGS:
• Installation shall only be performed by qualified personnel and in
accordance with local governing regulations.
• Materials of construction are chosen based on their chemical compatibility (or
inertness) for general purposes. For exposure to specific environments, check
with chemical compatibility charts before installing.
• Handle the device using the enclosure, not the antenna or the device tag, to avoid
damage.
Notes:
• The Process Device Tag shall remain with the process pressure boundary assembly
the event the device package is replaced, the Process Device Tag shall be transferred to
the replacement unit.
• SITRANS LR200 units are hydrostatically tested, meeting or exceeding the requirements
of the ASME Boiler and Pressure Vessel Code and the European Pressure Equipment
Directive.
1)
See
2)
See
3)
See
4)
See
5)
See
6)
The process pressure boundary assembly comprises the components that act as a barrier against
pressure loss from the process vessel: that is, the combination of process connection body and
emitter, but normally excluding the electrical enclosure.
Page EN-4
Downloaded from www.Manualslib.com
Use appropriate conduit seals to maintain IP or NEMA rating.
Non-Sparking/
1)
Energy Limited
2)
Non-Incendive
3)
Flameproof
4)
Increased Safety
5)
Explosion proof
Lloyd's Register of Shipping
ABS Type Approval
Non-Sparking/Energy Limited wiring
Non-incendive wiring (FM US only)
Flameproof wiring
on page 11.
Increased safety wiring
on page 11.
Explosion-proof wiring (FM/CSA US/Canada only)
SITRANS LR200 (HART) – QUICK START MANUAL
manuals search engine
(Brazil) INMETRO DNV 12.0068X
Ex ia IIC T4 Ga
IP66/IP67/IP68
-40 ºC
DNV #OCP 0017
ABNT NBR IEC 60079-0:2008 e
ABNT NBR IEC 60079-11:2009
(Europe) ATEX II 3 G Ex nA/nL IIC T4 Gc
(US) FM:
Class I, Div. 2, Groups A, B, C, D, T5
(Europe) ATEX II 1/2 G, Ex dmbia IIC T4 Ga/Gb
(Europe) ATEX II 1/2 G, Ex embia IIC T4 Ga/Gb
(US/Canada) FM/CSA: (barrier not required)
Class I, Div. 1, Groups A, B, C, D
Class II, Div. 1, Groups E, F, G
Class III T4
6)
on page 10.
on page 10.
on page 11.
≤ ≤
T a +80 ºC
6)
A5E31993614
. In